The Slide Gate Plate System is used to cast molten steel into tundish or ingots in a controlled manner . The Slide Gate Plates are placed outside the ladle and consist of two refractory plates – one fixed and another moving. The fixed plate is also called top plate and sliding plate is also ...
The Slide Gate Plate System is used to cast molten steel into tundish or ingots in a controlled manner . The Slide Gate Plates are placed outside the ladle and consist of two refractory plates – one fixed and another moving. The fixed plate is also called top plate and sliding plate is al ...
1.steel company details The steel plant produces 3.4 million tons of steel annually, but it is currently unable to produce at full capacity. The slab workshop has 4 electric furnaces, 4 refining LF furnaces, and 3 2-machine 2-stream slab continuous casting machines. 200-ton ladle and 25-ton ...
The wear of refractories in slide gate plates depends on the grade of steel, operating conditions of casting, bore diameter, and quality of refractories. The wear of slide plates is summarized as the following : 1. Bore diameter increase. 2. Corrosion in the sliding surface. 3. Decarburization ...
The ladle shroud nozzle for continuous casting is also called the protective sleeve. It is an important component connecting the ladle and the tundish . It is connected to the lower shroud of the sliding shroud device at the bottom of the ladle, and the lower end extends into the tund ...
บล็อก
อัลบั้ม
แบ่งปัน
ทักทาย