Hardware spec.
platform Ralink RT5350F
release Q3, 2013
protocol IEEE 802.11n
IEEE 802.11g、IEEE 802.11b;
IEEE 802.3、IEEE 802.3u;
transmission 150Mbps
ports 1*10/100M self-adaptive LAN/WAN;
1*MicroUSB;
1*USB 2.0;
1*SIM slot
buttons ON / C / OFF three gear switch;
3G/WAN/USB
Reset button;
battery capacity indicator
battery internal li-ion polymer 10400mAH
LED charging,battery,status
3G Module WCDMA Qualcomm 6290--2100mHz or CDMA EVDO Qualcomm 6085--800mHz
NAS(Net Attached Storage) contents from flash disk, harddisk could be read, written via WIFI device on web
Antenna internal omni antenna(dual antenna), 3G antenna
Size 132*72*25MM
Weight
Power input:5V 1A
output:5V 1-2A
operating enviroment working temperature: 0℃-40℃
storage temperature: -30℃-70℃
working humidity: 10%-90%RH noncondensing
storage humidity: 10%-90%RH noncondensing
wireless spec. Item
basic function wireless switch
SSID broadcast switch
channel: 1-13
frequency bandwith: 20MHz,40MHz auto;
wireless mode: 11n only, 11b/g/n mixed, 11g only, 11b only
working mode AP Mode
3G Router Mode
Clinet Mode
Bridge Mode
Repeater Mode
wireless security wireless MAC address filtering
wireless security switch
64/128/152 bit WEP encript
WPA-PSK/WPA2-PSK、WPA/WPA2 encript mode
wired function Item
utility function
3322DDNS(AP Mode not supported)
network setting support WAN connecting typePPoE,Dynamic IP,static IP(wireless router mode supported)
dial-up type: auto dial-up, manual dial-up,Regular dial-up (wireless router mode supported)
MAC address modify & copy(wireless router mode supported)
VPN Pass-through(wireless router mode supported)
static router(wireless router mode supported)
DHCP DHCP server (Client mode not supported)
client list (Client mode not supported)
static address (Client mode not supported)
port forwarding virtual server(not supported under wireless AP mode);
special application(not supported under wireless AP mode);
DMZ host(not supported under wireless AP mode);
UpnP(not supported under wireless AP mode)
security IP address binding with MAC address to prevent APP attach(not supported under AP mode);
IP address filter(not supported under AP mode);
Domain filter(not supported under AP mode);
MAC address filter(not supported under AP mode)
system tool traffic statistic;
syslog;
remote web management;
configuration files import & export;
firmware upgrade on web.